Mini 24 Legend System


Epilog Mini 24 Laser: Move up to the Mini 24 for a larger work area (24" x 12") that holds most standard engraving stock material. The large work area will hold many standard engraving material sheets and also features our Radiance™ High Definition Optics!

Wattages:       30, 40, 50 or 60 watts

Work Area:     24" x 12" (610 x 305 mm)

Materials:        Wood, acrylic, glass, plastic, stone, fabric, marking metals, anodized aluminum, and more.

Get a Quote

Epilog Mini 24 Laser System

With a convenient table size of 24" x 12" (610 x 305 mm), the Mini 24 is the perfect size to fit pre-cut laserable materials. The high quality engraving across the entire table is a result of the highest-quality components, including linear encoders for perfect laser positioning, high-speed servo motors, and our Radiance™ High Definition Optics. Below you can explore the many reasons why the Mini 24 is the choice of so many for their laser engraving and cutting needs.

System Features

  • Radiance™ High Resolution Standard Optics
  • High Speed Servo Motors
  • Highly Accurate Linear Encoders
  • Automatically Focusing
  • Air Assist to Reduce Flare-Ups
  • Ethernet and USB Networking
  • More Robust, Level Engraving Table
  • 1" thick Integrated Cutting Table
  • Lenses Rated to 500 watts
  • Stainless Steel Bearings
  • Motorized Table
  • Super-Silent™ Cooling Fans
  • Memory in the Machine
  • Easy to Maintain CO2 Waveguide Laser Tubes
  • Integrated Vacuum Table
  • 3D Engraving Mode
  • Stamp Engraving Mode
  • Drop-Down Front Loading Door
  • Moveable Home Position
  • Raster/Vector Color Mapping
  • Strong Kevlar Drive Belts
  • Adjustable Speed and Power on the Fly
  • Made in the USA Quality

Epilog Mini 24 Technical Specifications


Engraving Area24" x 12" (610 x 305 mm)
Maximum Material Thickness5.5" (140 mm)
Maximum Material Thickness with Table Removed8" (203 mm) 23.5" x 11.75" (597 x 298 mm) engraving area.
Laser Wattage30, 40, 50, or 60 watts
Laser SourceState-of-the-art, digitally controlled, air-cooled CO2 laser tubes are fully modular, permanently aligned and field replaceable.
Intelligent Memory BufferStore up to 10 jobs at the laser, each up to 2MB in size.
Air AssistAttach an air compressor to our included Air Assist to remove heat and combustible gases from the cutting surface by directing a constant stream of compressed air across the cutting surface.
Laser DashboardThe Laser Dashboard™ controls your Epilog Laser's settings from a wide range of software packages - from design programs to spreadsheet applications to CAD drawing packages.
Red Dot PointerSince the laser beam is invisible, the Red Dot Pointer on Epilog's Zing Laser allows you to have a visual reference for locating where the laser will fire.
Relocatable HomeWhen engraving items that are not easily placed at the top corner of the laser, you can set a new home position by hand with the convenient Movable Home Position feature on the Legend Series Lasers.
Operating ModesOptimized raster, vector or combined modes.
Motion Control SystemHigh-speed, continuous-loop, DC servo motors using linear and rotary encoder technology for precise positioning.
X-Axis BearingsGround and polished stainless steel NeverWear Bearing System.
BeltsAdvanced B-style Kevlar Belts.
ResolutionUser controlled from 75 to 1200 dpi.
Speed and Power ControlComputer or manually control speed and power in 1% increments to 100%. Vector color mapping links speed, power and focus to any RGB color.
Print Interface10 Base-T Ethernet or USB Connection. Compatible with Windows® XP/Vista/7/8.
Size (W x D x H)34.5" x 26" x 16"
(876 x 660 x 406 mm)
Weight90 lbs (41 kg)
120 lbs (55 kg) w/stand
Electrical RequirementsAuto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase, 15 amp AC.
Normal Sound Level59 db
Ventilation System400 CFM (680 m3/hr) external exhaust to the outside or internal filtration system is required. There is one output port, 4" in diameter.

System Accessories


Rotary Attachments for Cylindrical Items

The Rotary Attachment allows you to engrave wine bottles, mugs, glasses, flashlights and more.

Available for all Epilog Legend Elite systems, the Rotary Attachment adds the ability to engrave bottles, glasses, flashlights, and other cylindrical items.

Specially designed for our entire line of Elite lasers, it has been built to accommodate a large variety of shapes and sizes. The attachment easily adjusts for different lengths and will even rotate cylinders that have different diameters on each end.

So intuitive and easy to use, you can change from one glass to the next in seconds without removing the attachment from the engraver. Additionally, our proprietary design provides accurate image scaling without the need to input diameter or circumference calculations.


PhotoLaser Plus Software

Photo processing software that optimizes your photographs for engraving on a variety of materials.

PhotoLaser Plus takes photo engraving with your Epilog Zing Starter Series laser to the next level by easily processing photos for engraving on all types of materials.

Are you looking for a system that engraves outstanding photographs? How about a system that engraves photos in a consistent, predictable way for your customers?

Epilog Laser has partnered with CADLink to bring you the industry’s best photo processing software: PhotoLaser Plus. The easy-to-use software interface and powerful photo processing tools allow you to create the highest-quality photo engravings in the industry.


Optional Lenses

In addition to the 2.0" lens, we offer special lenses for specific applications.

1.5" Lens: Highest-Resolution Engraving

Although the standard 2.0 inch lens provides amazing detail, our 1.5-inch lens assembly has been designed for the highest-resolution engraving and etching of extremely small fonts.

4.0" Lens: Cutting Thicker Materials and Inside Deep Areas

The 4.0 inch lens produces a focused beam over a longer vertical distance, which makes it ideal when engraving within a recessed area of a product, such as inside a bowl or plate. The lens is also used for cutting through very thick materials.


Vector Pin Table

Raise and support your cutting materials for better edge quality.

The Pin Table incorporates movable pins that can be placed anywhere along the table's grid of one inch (25.4 mm) spaced holes. The movable pins also allow the user to raise and support the cutting material in locations where the laser will not be cutting, providing a means of eliminating backside reflection. The table also allows you to place pins to support parts that would normally fall out of the cutting pattern. A handy removable surface plate makes the task of cleaning up small parts easy without removing the Pin Table.


Air Compressor

Blows a constant stream of air on the cutting area.

Epilog's optional Air Compressor is available to work with the included Air Assist features of the laser systems. Direct a constant stream of air to your cutting surface to remove heat and combustible gases from the work area.

This high-quality air compressor unit feeds 30 psi of air through the Air Assist structure, giving you the best cutting results available. The rubber vibration-dampening feet reduce the noise level of the compressor, and connection is a breeze with our quick-connect inlet and outlet ports on the compressor and the laser system.